Sanyo POA-LN01 - Manual (Page 40)

This Network Board provides with a serial control port (RS232C) to control the monitor.
Example of Connection
Control the monitor through network and serial control function.
40
Serial Port Use
AV1
Power ON !
RS232C serial cable with
reverse type (Not supplied)
Specification and Setting of RS232C Terminal
Terminal : HDB9-PIN
3
5
4
2
1
7
9
8
6
No Connect
Ground
R x D
No Connect
T x D
1
5
2
4
3
No Connect
No Connect
No Connect
No Connect
6
7
9
8
Pin Configuration
Interface (Fixed)
Protocol
Stop bit
Baud rate
Parity
Data length
Flow control
RS-232C
1 bit
19200 bps
-
8 bits
-
Connection
✐ Exclusive driver software for control of this Network board is required. This product does not pro-
vide any driver software. Please consult your local dealer.
✐ There are 2 types of RS-232C serial cable, Normal and Reverse type. Usually, when connecting
between this product and a computer, use Reverse type of serial cable (Serial Cross Cable).
RS232C serial cable
with reverse type
(Not supplied)