Symbol Technologies LS 400XI - Manual (Page 35)

5-2
LS 400Xi Product Reference Guide
The following table lists the defaults for all parameters. If you wish to change any option,
scan the appropriate bar code(s).
Table 5-1. Default Table
Parameter Default Page Number
Set Default Parameter All Defaults 5-7
Host Type See page 5-1 5-8
Beeper Tone High Frequency 5-12
Beeper Volume High 5-13
Laser On Time 3.0 seconds 5-14
Power Mode Low Power 5-15
Beep After Good Decode Enable 5-16
Transmit “No Read” Message Disable 5-17
PDF Decode Feedback Enable 5-18
Linear Code Type Security Levels 1 5-19
Bi-directional Redundancy Disable 5-21
UPC/EAN
UPC-A Enable 5-22
UPC-E Enable 5-22
UPC-E1 Disable 5-22
EAN-8 Enable 5-23
EAN-13 Enable 5-23
Bookland EAN Disable 5-24
Decode UPC/EAN Supplementals Ignore 5-25