Sony CMT-GP8D - Manual (Page 29)

T
a
pe
– R
e
cor
d
ing
29 GB
You can record just the portions you like from a
disc (DVD, VIDEO CD, CD and MP3) or radio
program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 37).
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Press DIRECTION repeatedly to select
“
g ” to record on one side. Select
“ h ” or “ j ” to record on both sides.
3
Press TAPE nN repeatedly to select
recording side, then press x .
If you select both sides recording or front
side recording, press TAPE nN to light
up the N indicator, then press x. If you
record on the reverse side, press TAPE
nN again to light up the n indicator,
then press x.
4
Press one of the following buttons to
select the desired source to record.
• DVD NX: To record from this
system’s CD/DVD player. Press x twice
to stop playback.
• TUNER/BAND: To record from this
system’s tuner.
• MD: To record from the connected
optional component to MD IN L/R jacks.
5
Press z START.
The tape deck stands by for recording.
“REC” flashes.
6
Press z START, then start playing the
desired source to record.
Recording starts.
To stop recording
Press x.
Notes
• You cannot listen to other sources while recording.
• If no sound is being recorded when recording from a
DVD, set “Dolby Digital” or “DTS” to “PCM” under
“AV” in the Setup Display.
• The sound effect automatically switches to “FLAT”
in step 5.
Tips
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• For recording from the tuner:
If noise is heard while recording from the tuner,
move the respective antenna to reduce the noise.
Recording on a tape
manually
— Manual Recording