Sony CMT-GP8D - Manual (Page 15)

D
VD/VI
D
E
O
CD/CD/MP3/
J
PEG –
Pla
y
15 GB
Using the on-screen display
Press REPEAT repeatedly during play.
Each time you press the button, the setting
changes cyclically as follows:
x
When playing a DVD
• Off: does not play repeatedly.
• Title: repeats the current title on a disc.
• Chapter: repeats the current chapter.
x
When playing a VIDEO CD/CD/MP3/JPEG
• Off: does not play repeatedly.
• All: repeats all the tracks/files on a disc.
• Track (except for JPEG): repeats the current
track.
• File (JPEG only): repeats the current file.
To cancel Repeat Play
Select “Off”.
Notes
• Depending on the DVD, you cannot perform Repeat
Play.
• You cannot perform Repeat Play during PBC
playback of VIDEO CDs (page 14).
• If you select “All”, the program repeats up to five
times.
Tip
You can set Repeat Play when the playback is stopped.
Press REPEAT repeatedly to select the setting, then
press DVD
N (or DVD NX on the unit) to start
Repeat Play.
You can make a program of up to 12 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 28).
The program operation can only be set using the
TV screen.
1
Press DVD
N
(or DVD
NX
on the
unit) to switch the function to DVD.
Playback starts.
2
Press
x
twice to stop playback.
3
Press PLAY MODE repeatedly in stop
mode until the Program Display
appears on the TV screen.
4
Press
M
/
m
/
<
/
,
repeatedly to select
the desired step number.
5
Press the number buttons to select the
track you want to program.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
6
To program other tracks, repeat steps 4
and 5.
7
Press
M
/
m
/
<
/
,
repeatedly to select
“Play Program”, then press DVD
N
(or
DVD
NX
on the unit).
Program Play starts.
Creating your own
program
— Program Play
7
8
9 10
11
12
Track
All Clear Play Program
Program
1
2
3 4
5
6
7
8
9 10
11
12
Track
All Clear Play Program
Program
1 3
2
3 4
5
6
continued