Sanyo VPC-E10EX - Manual (Page 99)

English
88
4
If the modified image is satisfactory,
press the SET button.
h The screen to save the corrected
image appears.
h To discontinue the procedure, press
the MENU button. The modified
image is discarded, and you are
returned to the Blur Correction
Screen.
SAVE AS NEW:
The modified image is saved as a
separate image, and the original
image is preserved.
OVERWRITE:
The original file is deleted, and only
the modified image is saved.
5
Select the desired method to save the modified image, and press the
SET button.
h The modified image is saved, and you are returned to the Blur
Correction Screen.
HINT
About the blur correction icon
i On the Blur Correction Screen, an icon indicating the degree of blur appears.
: Blur correction unnecessary or blur correction completed.
: Blur correction possible
: Blur correction not possible
If the “Blur correction not successful” message appears...
i The camera was not able to successfully repair the image.
i The correction function works to automatically edit flaws that the camera
detects in captured images. In some cases, the camera may not be able to
repair the image.
i Blur correction is not possible for images captured at a shutter speed of 1/8
sec or less, for resized images, or for images captured using a different
digital camera. Also, blur correction may not be possible in cases of
extreme blur.
Concerning the date and time information for the modified image
i The date display that is shown when an edited image is played back is the
date that the image was saved after it was modified.
OK OK OK
Select the type of save Select the type of save Select the type of save
SAVE AS NEW
OVERWRITE