Sanyo VPC-E10EX - Manual (Page 115)

English
104
1 [Date and time setting]
(page 25)
h Set the camera’s internal
clock.
2 [Sounds] (page 105)
h Adjust the sounds produced
by the camera.
3 [Post-view] (page 107)
h Specify how long a still image
is displayed on the monitor
after it is captured.
4 [LCD brightness] (page 35)
h Adjust the brightness of the
monitor.
5 [ language] (page 108)
h Select the language in which
the monitor messages are
displayed.
6 [TV system setting] (page 109)
h Select the type of TV signal
that is output from the
camera’s USB/AV terminal.
7 [Auto power off] (page 110)
h Specify the time elapsed
before the auto power off
function operates to turn the
camera off.
8 [File number memory]
(page 111)
h Set the file number memory
function to ON or OFF.
9 [Format] (page 114)
h Reformat the camera’s internal
memory or the card installed in
the camera.
0 [Reset camera settings]
(page 116)
h Reset the camera to the
factory-preset settings.
i 7 through 0 are displayed when you press the [n] or [o] button to scroll.