Sanyo VPC-E10EX - Manual (Page 80)

69
English
TOUCH SENSOR (TOUCH FOCUS) SETTING
The touch sensor function, by which the autofocus is activated by a finger-
touch on the shutter button, can be set to ON or OFF. When the touch sensor
function is set to OFF, the autofocus is activated when you press the shutter
button halfway; then gently press the shutter button to snap the picture.
1
Display the Recording Menu (page 66).
2
Select “TOUCH SENSOR” and press the SET button.
h The sensor menu appears.
3
Select the desired icon, and press the SET button.
h The selected touch sensor function is set.
CAUTION
i When the camera is attached to a tripod, the touch sensor sensibility may
be diminished. This happens because the touch sensor works by detecting
changes in the capacitance when the camera is touched with bare hands.
The touch sensor sensibility will also be diminished, for example, if you
hold the camera with gloved hands.
i When the camera is used near inverter-type fluorescent lights, the touch
sensor sensitivity may be diminished.
#: The touch sensor function is set to ON.
$: The touch sensor function is set to OFF.