Sagem F@ST 1500WG - Manual (Page 59)

4 - Configuring the SAGEM F@st™ 1500 ADSL router
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Reproduction and communication prohibited without the written permission of E E E E Page 4-13
4.3.4 Firmware Upgrade
Use this screen to update the firmware or user interface to the latest versions. Download the
upgrade file from the Sagem web site, and save it to your hard drive. In the Upgrade Target
field, choose Firmware. Then click “Browse...” to look for the downloaded file. Click “Apply”.
Check the Status page Information section to confirm that the upgrade process was successful.
4.3.5 Reset
Click “REBOOT ROUTER” to reset the SAGEM F@st™ 1500 ADSL Router . The reset will be
completed when the power LED stops blinking.
If you perform a reset from this page, the configurations will not be changed back to the factory
default settings.
If you use the Reset button on the front panel, the SAGEM F@st™ 1500 ADSL
Router performs a power reset. If the button is depressed for over five seconds, all
the LEDs will be lighted and the factory settings will be restored.