4 access control – Sagem F@ST 1500WG User Manual
Page 55
4 - Configuring the SAGEM F@st™ 1500 ADSL router
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Reproduction and communication prohibited without the written permission of
E
E
E
E
Page 4-9
4.2.4 Access
Control
Access Control allows users to define the outgoing traffic permitted or not-permitted through the
Wi-Fi interface. The default is to permit all outgoing traffic.
The following items are on the Access Control screen:
¾
Click
Yes to turn on the filtering function, or No to disable this function.
If you have enabled this function, you can enter the client MAC addresses that you want to filter.
You can give up to 32 client stations.
Once you have done your settings, click “Finish” to save these settings and quit the Setup
Wizard.
Your SAGEM F@st™ 1500 ADSL Router is now set up. Go to “Troubleshooting” on
Appendice A, if you cannot make a connection to the Internet.