Sagem F@ST 1500WG - Manual (Page 131)

Appendix E - Default configuration
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Reproduction and communication prohibited without the written permission of E E E E Page E-3
Note: The OAM functions provided are as follows:
- Segment and end-to-end flow F4 and F5 management by VC.
- AIS/RDI functions.
- Response to loopback cells F4 or F5.
- Response to continuity check (CC) enable/disable cells.
PPP characteristics IP address Automatic negotiation
MTU 1500
PPP restart Enabled
Management Access Disabled
ADSL characteristics Maximum upstream rate 896 kbit/s
Maximum downstream rate 8160 kbit/s
Mode Multimode
Latency Simple latency (fast or interleaved)
Note: The user can revert to the default configuration via the HTTP interface.