JVC GR-DVL25 - Manual (Page 43)

EN
43
MAKE CONNECTIONS
Also refer to pg. 32 and 33.
1 To connect to:
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the RM-V711U’s
PAUSE IN connector.
2 Insert a recorded tape into the camcorder and set the
Power Switch to “
”.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s
instructions).
SELECT SCENES
4
Point the remote control at the camcorder’s remote
sensor. Press PLAY (4) and then press R.A.EDIT ON/
OFF on the remote control.
The Random Assemble Editing Menu appears.
5
If using a Fade/Wipe at the beginning of the scene,
press FADE/WIPE on the remote control.
•Cycle through the effects by pressing repeatedly,
and stop when the one you want is displayed.
•You cannot use a Picture Wipe/Dissolve at the
beginning of Programme 1.
NOTES:
● Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
● When editing on a VCR equipped with DV input
connector, the DV cable can be connected instead of
the S-Video cable and Audio/Video cable.
CONTINUED ON NEXT PAGE
T W
FADE/WIPE
PLAY
R.A.EDIT
ON/OFF
DISPLAY
To Remote
PAUSE or R.A.EDIT
To
S-Video
Output To JLIP***
RM-V711U
(provided)
VCR
TV
To PAUSE IN
Editing cable
(provided)
Connector
cover**
* Connect when the S-Video cable is not used.
** When connecting cables, open this cover.
*** GR-DVL45/DVL40 owners: Use the plug
which has three yellow rings around the pin.
Connector cover**
Red to
Audio
Output R
A/V cable (provided)
[RCA plug to RCA plug]
White to
Audio Output L
Yellow to
Video
Output*
S-Video
cable
(provided)
To AUDIO,
VIDEO*
and
-IN
connectors
Core filter
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DISPLAY” to “ON” or “OFF” in the Playback Menu (
੬
pg. 30).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Playback Menu (
੬
pg. 30).
•Playback Sound Mode Display
.... set the Power Switch to “ ”. Press MENU/BRIGHT and set “ON SCREEN” in the Date/Time Menu
(
੬
pg. 18 – 20) to “ON” or “OFF”. Then, set the Power Switch back to “ ”.