JVC GR-DVL25 - Manual (Page 10)

10
EN
0
FOCUS
EXPOSURE
AUTO
OFF
OFF
AUTO
AUTO
W. BALANCE
4
FADER
/ WIPE
P. AE
/ EFFECT
END
TO MODE MENU
– – – – – 6 – – – – –
SP SP LP
A
M
P LA Y
OF
F
– – – – – 6 – – – – –
REC MODE
WIDE MODE OFF
64X
SP
ZOOM
GAIN UP
DIS
4
TO DATE / TIME MENU
TO SYSTEM MENU
END
ON
AGC
– – – – – 6 – – – – –
REC MODE
WIDE MODE
OFF
64X
SP
ZOOM
GAIN UP
DIS
4
TO DATE / TIME MENU
TO SYSTEM MENU
END
ON
AGC
Recording Mode Setting
Set depending on your preference.
1
Set the Power Switch to “ ”. The power lamp lights
and the camcorder is turned on.
2 Press MENU/BRIGHT. The Recording Menu appears.
3
Move the highlight bar to “TO MODE MENU” by
rotating MENU/BRIGHT. Press it and the Mode Menu
appears.
4
First move the highlight bar to “REC MODE” by
rotating MENU/BRIGHT. Press it and the parameter
“SP” or “LP” is highlighted. Select “SP” or “LP” by
rotating MENU/BRIGHT. Press it twice to exit from
the Recording Menu.
•Audio Dubbing is impossible on a tape recorded in
the LP mode.
•“LP” (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
● If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
● It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
● During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
Power lamp
Display
Recording mode
indicator
MENU/BRIGHT
Dial
Power Switch
GETTING STARTED (cont.)
Mode Menu
Recording Menu