beautypg.com

Playback, Basic playback – JVC GR-DVL25 User Manual

Page 29

background image

EN

29

PLA

YBACK

A

M

PL

AY

OF

F

Still Playback:

Pauses during playback.

1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.

● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically

engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

● When 4/6 is pressed, the image may not pause immediately while the camcorder stabilizes the still

image. During this time, if PAUSE (6) on the remote control is pressed, Slow-Motion Playback will
start. This is not a malfunction.

Shuttle Search:

Allows high-speed search in either direction.

1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.

● During playback, press and hold 2 or 3. The search continues as long as you hold the button.

Once you release it, normal playback resumes.

● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Slow-Motion Playback, Frame-By-Frame Playback, Playback Zoom and

Playback Special Effects

Available only with the RM-V711U remote control (provided) (

pg. 40, 41).

Power Switch

Power lamp

Rewind Button

Fast-Forward Button

Play/Pause Button

Stop Button

NOTES:

● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off

automatically. To turn on again, set the Power Switch to “OFF”, then to “

”.

● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (

pg. 32, 33).

● You can also view the playback picture on the LCD monitor with it flipped over and retracted.

● LCD monitor/viewfinder indications:

When power is supplied from a battery: the “

” battery pack remaining power indicator is displayed.

When power is supplied through the DC cord: “

” does not appear.

During Stop mode, none of the indications are displayed.

● Copyguarded tapes cannot be played back. Only a blue screen is displayed.

1

Load a tape (

pg. 9).

2

Set the Power Switch to “

”. To start playback,

press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape

during Stop mode.

To Control The Speaker Volume . . .

.... slide the Power Zoom Lever (VOL.) towards “+” to

turn up the volume, or towards “” to turn down the
volume.

PLAYBACK

Basic Playback

Power Zoom Lever (VOL.)

Speaker