JVC LVT1321-010C - Manual (Page 28)

26
Adjusting the center channel localization for Pro
Logic IIx Music and Pro Logic II Music—CENTER
WIDTH
This setting is available when Pro Logic IIx Music or Pro Logic II
Music is activated for the analog or digital 2-channel sound signal.
To activate Pro Logic IIx Music or Pro Logic II Music, see page 33.
• If “CENTER SPK” is set to “NO” (see page 19), this item is not
adjustable.
• Once you have made an adjustment, it is memorized until you
change the setting.
• You cannot use the remote control for this setting.
Adjustable range: OFF and 1 to 7 (in 1 step intervals)
Initial setting: C WIDTH
<
3
>
As the number increases, the center channel sound moves
toward the left and right speakers.
Normally, select “3.”
Adjusting the sound localization position for Pro
Logic IIx Music and Pro Logic II Music—
DIMENSION
This setting is available when Pro Logic IIx Music or Pro Logic II
Music is activated for the analog or digital 2-channel sound signal.
To activate Pro Logic IIx Music or Pro Logic II Music, see page 33.
• Once you have made an adjustment, it is memorized until you
change the setting.
• You cannot use the remote control for this setting.
Adjustable range: 1 to 7 (in 1 step intervals)
Initial setting: DIMENSION
<
4
>
As the number increases, the sound localization moves towards
forward from backward.
Normally, select “4.”
Adjusting the sound localization of the center
channel—CENTER GAIN
This setting is available only when Neo:6 Music is in use.
• If “CENTER SPK” is set to “NO” (see page 19), this item is not
adjustable.
• Once you have made an adjustment, it is memorized until you
change the setting.
• You cannot use the remote control for this setting.
Adjustable range: 0 to 1.0 (in 0.1 step intervals)
Initial setting: C GAIN < 0.3 >
As the number increases, the center channel will be localized
clearly.
Normally, select “0.3.”
Adjusting the center tone—CENTER TONE
This setting is available when one of the Surround/DSP modes is
in use. To activate Surround/DSP mode, see page 33.
• If “CENTER SPK” is set to “NO” (see page 19), this item is not
adjustable.
• This setting is common to all Surround modes, and is
memorized separately for DSP modes.
Adjustable range: 1 to 5 (in 1 step intervals)
Initial setting: C TONE
<
3
>
As the number increases, the dialogue becomes stronger.
Normally, select “3.”
• When the center tone is set to other than “C TONE
<
3
>
,” the
C.TONE indicator lights up on the display.
From the remote control:
Press C. TONE repeatedly to select the level you want to
adjust.
Aligning the vertical localization of the center
channel for Surround/DSP modes—CENTER ALIGN
This setting is available when one of the Surround/DSP modes
(except PLIIx Music, PLII Music, NEO:6 Music, and ALL CH
STEREO) is in use. To activate Surround/DSP mode, see page
33.
• If “CENTER SPK” is set to “NO” (see page 19), this item is not
adjustable.
• Once you have made an adjustment, it is memorized for each
Surround/DSP mode.
• You cannot use the remote control for this setting.
C ALIGN
<
ON
>
Select this when you cannot feel as if the
actors or singers are speaking or singing on
the screen.
C ALIGN
<
OFF
>
Center alignment is turned off.
Initial setting: C ALIGN
<
OFF
>
1 2 3
4 5 6
7 8 9
10 0 10
23-26RX-D301S[UJ]_f.p65 05.5.25, 6:29 PM 26