John Deere 5103E User Manual
Page 164
Troubleshooting
PY80265,05GO990
–19–10SEP05–2/2
Symptom
Problem
Solution
Insufficient or no hitch response
Front attachment of center link in
Move center link attachment to lower
to draft load
upper holes.
bracket holes.
Draft control lever in “Off” position.
Move lever rearward.
Lift links too short.
Adjust lift links.
Lack of penetration.
See implement operator’s manual.
Rate-of-drop too slow.
Adjust rate-of-drop valve.
Hitch too responsive
Front attachment on center link in
Move center link attachment to
lower bracket holes.
upper bracket holes.
Improper draft sensing adjustment.
Move lever forward.
Hitch drops too fast
Rate-of-drop set too fast.
Adjust rate-of-drop.
Rockshaft control levers “drift”.
Friction disks are loose.
Adjust rockshaft control lever friction.
Levers too loose.
See procedures in “Rockshaft and
3-Point Hitch” section or see your
John Deere dealer.
145-7
022607
PN=162