Tray lock, Sound and other settings, Advanced operations – JVC TH-G10 User Manual
Page 35
32
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
.
3
Press ENTER.
4
Press Cursor Y/5 repeatedly to
select “A-B”.
5
Press ENTER at the beginning of
the part you want to repeat (point
A).
6
Press ENTER at the end of the part
you want to repeat (point B).
A-B Repeat Playback starts.
7
Press ON SCREEN.
The on-screen bar disappears.
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE
• When playing back a DVD VIDEO, A-B Repeat Playback is
possible only within the same title.
• “A-B” cannot be selected during Program and Random
Playback.
• “A-B” cannot be selected during playback with PBC function.
You can lock the tray and prohibit unwanted disc ejection.
On the center unit ONLY:
While the system is on standby mode, press
0 with 7
pressed and held.
• “LOCKED” appears on the display window.
• If you try to eject the disc, “LOCKED” appears to indicate
that the tray is locked.
To cancel
Carry out the same operation again.
• “UNLOCKED” appears on the display window.
NOTE
• Before you start the operation; There is a time limit when
doing the following steps. If the setting is cancelled before
you finish, start from step 1 again.
1
Press SETTING with SHIFT
pressed.
Example:
2
Press Cursor Y/5 to select the
item you want to set.
• BAL. (Balance):
You can adjust the balance of the sound between “R
(right) –21” and “L (left) –21”. To set the balance to
normal, select “CNTR (center)”.
• AUX. LVL (Aux level):
You can select the audio input level through AUX IN
(VCR) terminal.
AUX. LVL1:
Normally select this.
AUX. LVL2:
Select this when the source from the
component connected to the AUX IN
(VCR) terminal is too quiet with “AUX.
LVL1” selected.
3
Press Cursor 3/2 to make an
adjustment or selection.
Example:
The adjustment display automatically disappears a few
seconds later with the current setting.
Tray lock
Press and hold
Sound and other settings
Advanced operations
See page 21 for button locations.
EN_THP7-P3[U]4.book Page 32 Tuesday, April 4, 2006 5:08 PM