JVC I'Art Pro 1204TNH-II-IM - Manual (Page 68)

68
Button Functions
The M UTING button instantly turns the volume down completely when you press it. Press
M UTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press M UTING again.
Muting
The V IDEO S TATUS button gives you a choice of four TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
Dynamic - Gives a vivid picture with better contrast when viewing in
a brightly lit room.
Theater - Gives a rich, film-like look to video when viewing in a
dimly lit room.
Game - Used for when you are playing video games connected to
your TV.
Press the V IDEO S TATUS button
By every press of the V IDEO S TATUS button, you change the mode.
Note:
• You can also change the mode by pressing the π† buttons.
• The VIDEO STATUS function is initially set to DYNAMIC. Unless the TV is being watched
in an extremely bright room, it is recommended to change the VIDEO STATUS setting to
standard, theater or game. Doing so will reduce the chance of PDP burn-in and extend the
life of the PDP.
• You can also access the FRONT CONTROL PANEL screen by using the M ENU button on
the back of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
VIDEO STATUS by pressing M
ENU † on the back panel and choose a mode by using the
C HANNEL +/- buttons ( √ OPERATE ® ).
Video Status
VIDEO STATUS
STANDARD
DYNAMIC
THEATER
GAME
Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, press N
ATURAL C INEMA and set it to AUTO. Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
Press the N ATURAL C INEMA button
Notes: The natural cinema mode is automatically set to “AUTO” in the
following cases:
• Turning on or off
• Changing the channel or input mode
• Using multi-screen functions
Natural Cinema
NATURAL CINEMA
AUTO
ON
OFF
PD-42\50X795 (B) English 68 12/20/04, 9:26:39 AM