JVC AV 61S902 - Manual (Page 32)

32
Initial Setup
CHANNEL SUMMARY lets you customize the list of channels set after you run AUTO TUNER SETUP. You may
delete unwanted channels or add channels that are new, or were not picked up by AUTO TUNER SETUP
because of weak signals.
To access the CHANNEL SUMMARY, use the
5∞ arrows to move to the CHANNEL SUMMARY option in the
INITIAL SETUP menu. Select the option by pressing
2
or
3
.
The CHANNEL SUMMARY screen will now be displayed with the chan-
nels set to scan marked with an “
”. You can delete channels from the
scan by removing the “ ”. If any channels were missed during AUTO
TUNER SETUP and you wish to add them, you may by placing an “ ”
next to the channel number.
To add or delete channels, use the
5∞ arrows to move to the SCAN
column. Use the 5∞ arrows to move through the list of channels.
Press
2
or
3
to include or delete channels from scanning. When you
have added or deleted all the channels you wish, you can leave the CHANNEL SUMMARY screen by press-
ing E
XIT on the remote control.
You can also use the CHANNEL SUMMARY screen to lock certain channels. When a channel is locked, a
code must be entered before the channel can be viewed.
To lock or unlock channels, use the
5∞ arrows to move to the Lock
column (marked with the icon). use the
5∞ arrows to move
though the list of channels. Press the Z ERO button on the remote con-
trol to lock or unlock a specific channel. A channel is locked when the
icon appears next to it. When you are finished, you can leave the
CHANNEL SUMMARY screen by pressing E XIT on the remote control.
CHANNEL SUMMARY
Channel Summary - Lock
Channel Guard Message
When a viewer attempts to watch a guarded channel, this message appears:
To watch a channel that you have locked, enter the Lock Code using the 10 key
pad (see “Set Lock Code” - page 35). If the wrong code is entered, the message
INVALID LOCK CODE! will flash on the screen. The channel cannot be accessed
until the correct code is entered.
• Once a channel has been unlocked, it will remain unlocked until the
television is turned off.
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
CHNO.
01
02
03
04
05
SCAN CHNO.
06
07
08
09
10
SCAN
CHNO.
01
02
03
04
05
SCAN CHNO.
06
07
08
09
10
SCAN