Connections, Cable and vcr connections – JVC AV 61S902 User Manual
Page 12
12
Connections
INPUT
A
SPLIT
OUT
INPUT
B
75
Ω
( VHF / UHF )
Cable and VCR Connections
There are three basic antenna or cable connections:
• If you plan to only connect an antenna or to a cable television system, please refer to
Diagram #1.
• If you plan to connect a VCR and have an antenna or a cable television system that does not require the use
of a cable box, please refer to
Diagram #2.
• If you plan to connect a VCR and have a cable system that requires the use of a box to receive any or all
cable channels, please refer to
Diagram #3.
Please note:
In the following diagrams, only the portion of the AV-61S902’s rear panel jacks that will be used
for the connection described will be shown. For an illustration of the complete rear panel, please see page 11.
• For instructions on connecting a satellite or HDTV receiver, please see page 15.
1) Connect a coaxial cable out from the cable TV wall outlet or external antenna into the RF Input A.
2) Connect a coaxial cable out from the Cable Split Out RF jack into the RF input on the cable box.
3) Connect a coaxial cable out from the Cable Box RF Output jack into the television’s RF Input B.
• If you are connecting an external antenna or to a cable system that does not require the use of a cable box to
receive any or all cable channels, follow step 1 only.
•
Coaxial cables are not included with the television.
Cable box
Diagram #1