Jensen UV9 - Manual (Page 22)

18
UV9
DVD/CD AUDIO OPERATION
Instructions for TFT control and Insert/Eject are the same for
DVD and CD operation. Please see the DVD/Disc Video
Operation section for information about these topics.
The UV9 will play music or other audio files from the following
disc media:
• CD-DA
• CD-R/RW
• DVD
• DVD+R/RW
• DVD-R/RW
Upon inserting a disc with the TFT screen open, the disc and
track title (if available), along with the track number and
playing time appear on the screen.
CD Player User Interface
The on-screen indicators and touch key areas for CD
playback are outlined below.
1. Current track and total number of tracks on disc
2. Elapsed playing time
3. Current time
4. Track titles
5. Disc title
6. /||: Touch to play/pause disc playback
7. : Touch to stop disc playback
8. >>|: Touch to move to next track
9. |<<: Touch to move to previous track
10. >>: Touch to fast forward current track
11.
<<: Touch to rewind current track
12. Touch to activate/deactivate Repeat play mode
13. Touch to activate/deactivate Random mode
14. Touch to access the direct entry screen
15. : Touch to view the SETUP menu
16. Touch for quick access to Equalizer level settings
17. Touch to view the SOURCE MENU and select a new
playback source
Controlling Playback
Stopping Playback
Touch the button on screen or press the /BAND button
(18) on the remote control to stop disc play.
To resume playback, touch the /|| button on screen or press
the >/|| button on the remote control (16).
Pausing Playback
Touch the /|| button on screen or press the >/|| button on the
remote control (16) to suspend or resume disc play.
Moving Through Tracks
Press the >>| button (17) on the remote control or on screen
to advance to the next track on the disc.
Press the |<< button (15) on the remote control or on screen
to move to the previous track.
Repeat Playback
Touch the button on screen or press the REPT button (7)
on the remote control to alter repeat mode according to the
following:
• DVD: Repeat Chapter, Repeat Title, Repeat Off
• CD-DA: Repeat Single, Repeat Off
• CD-R/RW: Repeat Single, Repeat Off
• DVD-R/RW: Repeat Single, Repeat Off
Track Scan Select (CD-DA discs only)
During disc play, press the SCAN button (30) on the remote
control to play the first 10 seconds of each track. When a
desired track is reached, press the SCAN button again to
cancel the function and play the selected track.
Random Play Select
While disc play is stopped, touch the button on screen to
play the tracks on the disc in a random, shuffled order. Touch
the
(RDM) button again to cancel Random Play mode.
NOTE: CD-R and CD-RW will not play unless the
recording session is finalized.
Fast Forward
Touch the >> button on screen or press the >> button (12) on
the remote control to fast forward. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”,
“8X”, and “20X”.
Direct Track Entry
To select a track directly, touch the button on screen
control to display the direct entry menu.
Enter the desired track using the on-screen number pad.
Press the enter button (arrow) to tune to the selected station.
To exit the screen without changing the station, touch Exit. To
clear your entry and start over, touch Clear.
15 1
7
2
13 5
16
12
3
CD T: 1/10 00:00:23
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
14
4 9 11
10
8
6
01:02 PM
E Q
DISC
17
Chapter: _ _
1 2 3
4 5 6
7 8 9
0 Clear
Exit
Enter