Jensen UV9 User Manual

Page 14

UV9

The Audio menu will automatically exit after a few seconds of
inactivity. To exit quickly, touch the top left corner of the
screen or press and hold the rotary encoder (11).

System Reset

To correct a system halt or other
illegal operation, use the tip of a pen
to press the reset button (12) located
on the front bottom-right corner of the unit. After a system
reset, the unit restores all factory default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD
resumes play once the reset is complete.

Steering Wheel Control (SWC)

The UV9 is compatible with the PAC (Pacific Accessory
Corporation) steering wheel control adapter SWI-PS. A
3.5mm female connector (labeled “SWC Interface”) on the
back of the head unit allows connectivity to the PAC adapter.
Please refer to the instructions included with the PAC adapter
for detailed installation information.

SWC Functions

The following controls are available for most vehicles:

Vol Down

Vol Up

Mute

Seek Down / Previous Track / ** Preset Down

Seek Up / Next Track / ** Preset Up

SRC (Source)

** Select

Band

** If additional steering wheel control buttons are available on
the vehicle, function 7 / 8 may be assigned the "Select"
feature. This feature / function may not be available on some
vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is
pressed momentarily, Preset Up will be selected. If "Select"
(function 7 or 8) is held down and function 5 is pressed
momentarily, Preset Down will be selected.

[RESET] Button