Selecting the picture mode, Daily operations, Cont.) – JVC GM-H40L2A User Manual

Page 20

Selecting the picture mode

DYNAMIC:

Suitable for displaying documents for
presentation.

NORMAL:

Displays the original picture.

USER:

You can adjust picture quality as you like
(see “PICTURE SETTING” on page 21).

NOTE

• You can adjust the picture quality, such as brightness, for

each picture mode. The setting you have made is stored (see
“PICTURE SETTING” on page 21).

Viewing Inputs A and B
(analog RGB input) at the
same time—Dual Display

You can view Inputs A and B (analog RGB input) at the
same time.
• This monitor supports 2 dual display modes.

PIP mode

PBP mode

• Each time you press the button, the corresponding dual display

mode turns on or off.

• When the dual display mode is activated, the current input is

displayed on the main window, and the other is displayed on
the sub window.

NOTE

• The dual display mode is available only when analog RGB signals are

being input to Input B. For details, see page 25.

• You cannot change the input when the dual display mode is in use. To

change the inputs for the main and sub windows, deactivate the dual
display mode, change the input, and then activate the dual display mode.

• Use the main menu to adjust position and/or size of the sub window (see

“DUAL DISPLAY” on page 25).

NOTE

• When using the buttons on the main unit for operations

described on this page, use the main menu (see page 21
or 25).

Daily Operations

(cont.)

Main
window

Main window

Sub window

Sub
window

06-42_GM-H40L2A-f.indd 18

06.4.24 5:20:28 PM