JVC HR-XV48EK - Manual (Page 30)

Filename [XV48EK_08DVD.fm]
Masterpage:Left0
30
Page 30 18 November 2004 10:44 pm
OPERATIONS ON DVD DECK
Basic Playback
A
Load the disc.
● For details, refer to “Placing a Disc” ( ੬
pg. 6).
B
Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
C
Start playback.
Press 4.
Example: DVD VIDEO
● You can switch the display on the front display panel between
the title/chapter/track number and the playback time by
pressing – –:– –.
● It may take a few seconds to start playback.
● When inserting a DVD or Video CD disc, a menu display may
appear on the TV screen. To play back from the menu, refer to
“Locating a Desired Scene Using the DVD Menu” (
੬
pg. 31)
or “Locating a Desired Scene Using the Menu of a Video CD/
SVCD with Playback Control (PBC) Function” (
੬
pg. 31).
D
Pause playback.
Press 9.
● To resume normal playback, press 4.
E
Stop playback.
Press 8.
● When “RESUME” ( ੬
pg. 57) is “ON” or “DISC RESUME,” the
unit memorizes the position on the disc where you have
interrupted playback.
-To resume playback, press
4.
-To stop playback completely, press 8 again .
● Press x on the DVD deck to open the disc tray, then remove
the disc.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch on the remote
control to the right.
ATTENTION
● You can not use the DVD deck when the VHS deck is in
the Automatic Satellite Programme standby and recording
mode.
● You can use the DVD deck when the VHS deck is in the
timer standby mode.
● If the unit does not accept an operation, appears on the
TV screen. (Operations are occasionally unacceptable
even if
is not displayed.)
Slide to the
right.
Title number Chapter number
Playback time
XV48EK_01.book Page 30 Thursday, November 18, 2004 10:45 PM