JVC DLA-HD10KSU/E - Manual (Page 46)

46
Terminal Description (continued)
C
Parameters used for the data format
The following 3 types of parameters are used for command and response data:
(1) Numeric value (2) ON/OFF (3) Special parameters
Each parameter is as follows:
(1) Numeric value
A 2-byte hexadecimal value (sign included) is represented by a set of 4-digit (4-byte) characters.
The range that can be specified is from
A8000HB to A7FFFHB
(2) ON/OFF
Shows the status (ON or OFF) of the unit, such as POWER and HIDE.
(3) Special parameters
Operation mode parameters
c
External control command table
Operation mode: Only Asking command is possible
Character Hex Meaning
0 30 OFF
1 31 ON
Character Hex Meaning
0000 30h 30h 30h 30h Standby mode
0001 30h 30h 30h 31h Operate mode
0002 30h 30h 30h 32h Cool down mode
0004 30h 30h 30h 34h Emergency mode
Function Command
Asking Data Type
Operate mode ELSE Numeric Value ON/OFF Special Data
Operate U0F ן ן ן X ן
HIDE U00 X ן ן X ן
Left/Right Reversal U17 X ן ן X ן
Top/Bottom
Inversion
U18 X ן ן X ן
Operation Mode Z03 X X ן ן X
DLA-HD10_EN-FR.book Page 46 Thursday, November 10, 2005 12:54 PM