JVC DLA-HD10KSU/E - Manual (Page 32)

32
Adjustments and Settings Using Menus (continued)
C
Options Menu
................................................................................................
Menu Display
Adjusts the display duration of the menu screen.
● The menu screen display will not disappear automatically
when this is set to AOnB. Press the [EXIT] button to clear
the menu screen.
................................................................................................
Sleep Time
Sets the lapse time before automatically switching the
unit to the standby mode when there is no signal input.
................................................................................................
RC232C (bps)
Sets the communication speed (signal transmission
speed) when communicating with a computer using the
RS-232C terminal. Ensure that this is same as the rate
set at the computer.
................................................................................................
Zoom/Focus
Locks/Unlocks the power zoom/power focus functions of
the projection lens.
................................................................................................
Power Save
Switches the power (brightness) of the light-source lamp.
● It is possible to lower the power (brightness) of the light-
source lamp when this is set to AOnB, but the display will
appear darker than when this is set to AOffB.
● Adjustment of settings will be disabled for about 1 minute
after the setting is changed. In this case, adjust settings
after a lapse of at least 1 minute.
● Altering the AOnB,AOffB setting does not affect the lamp
usage time (lamp life) of the light-source lamp.
D
Information Menu
................................................................................................
Lamp Time
Displays the accumulated hours of usage of the light-
source lamp.
................................................................................................
Source
Automatically identifies the input video signal at the [DVI]
terminal of this unit and displays the signal name
(
A1080p50B or A1080p60B).
● When there is no video signal input to the [DVI] terminal, or
when there is input of a video signal that cannot be used
with this unit, no signal name will be displayed.
Setting Values:
A15secB,AOnB
Default Value: A15secB
Setting Values: A15minB,A30minB,A60minB,AOffB
Default Value: AOffB
Setting Values:
A9600B,A19200B
Default Value: A19200B
Setting Values: ALockB,AUnlockB
Default Value: AUnlockB
Setting Values: AOnB,AOffB
Default Value:
AOffB
NOTES:
● When the input video signal is switched, a blue back
image will appear for about 2 seconds.
● When nothing is connected to the [DVI] terminal, or if
there is no video signal, a ANo Signal DVI-DB message
will be projected.
● For a video signal that cannot be used with this unit, a
AOut of RangeB message will be projected.
● Video input signals that can be used with this unit are
1080/50p and 1080/60p signals by DVI-D.
DLA-HD10_EN-FR.book Page 32 Thursday, November 10, 2005 12:54 PM