JVC DLA-HD10KSU/E - Manual (Page 17)

17
Load batteries into the remote control. If the remote control starts to function erratically, replace the batteries.
a
Open the back cover
Press the back cover slightly and slide it in the
direction of the arrow.
b
Load the batteries
Insert the 2 (AAA) batteries supplied according to the
F, G marks. To prevent short circuit, be sure to insert
the
G (minus) end of the battery first.
c
Close the back cover
Slide in the direction of the arrow to close the back
cover.
Loading Batteries into the Remote Control
Precautions for Using Batteries
If batteries are incorrectly used, they may crack or
leak. This could cause fire, burn, malfunction, and
staining or damaging of the surroundings. Beware
of the following:
● Do not mix new and old batteries.
● Do not mix different type of batteries as they are
different in characteristics.
● Insert batteries according to the FG marks on the
battery case.
● Be sure to insert the minus G end in first to prevent
short circuit.
● Do not put batteries into fire or recharge them.
● Use only designated batteries.
● Remove the batteries if the remote control is not to be
used for a prolonged period.
● Use manganese batteries wherever possible. Do not
use rechargeable, alkaline batteries.
● Read the cautions displayed on the batteries.
Battery Life
Batteries last for 6 months to 1 year under normal use.
However, batteries provided are for confirming operation
and may not last that long. When the remote control fails
to operate properly, replace the batteries with new ones.
Battery Leakage
When the batteries are totally exhausted and can no
longer be used, replace them immediately.
Leaving the batteries in the battery compartment causes
leakage, which may in turn lead to malfunction.
ENGLISH
DLA-HD10_EN-FR.book Page 17 Thursday, November 10, 2005 12:54 PM