JVC DLA-HD10KSU/E - Manual (Page 39)

39
Cleaning and Replacing the Filter
Clean the filter regularly. Otherwise, air intake efficiency may deteriorate and malfunction may occur. If the filter is
extremely dirty and cannot be cleaned, or if it is damaged, replace the filter with a new one (inner filter: LC32058-
002A). Otherwise, dirt may enter the unit and appear on the screen, preventing you from enjoying the video fully. If dirt
has entered the unit or if you need information about the filter, please consult your authorized dealer.
a
Pull out the plug from the power outlet
● Pull out the power plug from the outlet while the
[STAND BY] indicator is still on.
b
Remove the inner filter
● Push up and lift the claw at the base of the inner filter,
followed by drawing out the filter.
c
Clean the filter
● Clean the filter with water and dry it, avoiding direct
sunlight. In extremely soiled cases, use of a neutral
detergent is recommended.
d
Reinstall the inner filter
● Check that the 2 claws at the left and right of the inner
filter are locked to this unit.
CAUTIONS:
● Put on rubber gloves when using a neutral detergent.
● After washing a filter with water, make sure that the
filter is completely dry before reinstalling. Otherwise,
electric shocks or malfunctions may occur.
● Do not clean inner filters with a vacuum cleaner. Since
these filters are soft, they may be damaged if they are
sucked into the vacuum cleaner.
Claw
Inner Filter
Claw
Inner Filter
ENGLISH
DLA-HD10_EN-FR.book Page 39 Thursday, November 10, 2005 12:54 PM