JVC DR-MX1S - Manual (Page 42)

Filename [MX1SEU_08VHS Operation.fm]
Masterpage:Left+
42
EN
BASIC OPERATIONS ON VHS DECK
Page 42Monday, 6 December 2004 14:01
Still Picture/Frame-By-Frame Playback
1
Press W to pause during playback.
● If there is vertical jitter, press PR +/– to correct the picture.
2
Press W to activate frame-by-frame playback.
● To resume normal playback, press I.
Slow Motion
1
Press W to pause during playback.
2
Press and hold W for 2 seconds, then release. Press W and
release again to return to still picture.
● Press N for forward slow motion or O for reverse slow
motion.
● To resume normal playback, press I.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR +/– to eliminate the noises.
Variable Speed Search
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
When pressing
N:
(SP, LP): +5x Y +7x
When pressing
O:
Once O is pressed, reverse search starts in –1x normal
playback speed. After this process, each press of O changes
the search speed between –5x and –7x in both SP mode and LP
mode.
(SP, LP): –1x N –5x Y –7x
● To resume normal playback, press I.
One Touch Replay
During playback (or Live Memory Playback), press w. The unit
rewinds the picture a little (about 7 seconds) and resumes playback.
● If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press v 1 to 6 times to skip over unwanted
sections.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
● To resume normal playback, press I.
Index Search
Your unit automatically marks index codes at the beginning of each
recording. This function gives you quick access to any one of the 9
index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press
S or T to activate Index Search. AS 1B or AT 1B is
displayed on the TV screen and search begins in the
corresponding direction.
● To access index codes 2 through 9, press S or T repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
S
twice.
To locate the beginning of D from the current position, press
T
once.
● When the specified index code is located, playback begins
automatically.
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback
mode,
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of colour.
● you cannot hear the sound.
9
6
DVD VHS
AUDIO
PR+/-
8
4
2
5 3
PROGRESSIVE
SCAN
HDD
CABLE/SAT
DVD TV
Current position
Index number
MX1SEU_00.book Page 42 Monday, December 6, 2004 2:01 PM