JVC GR-DV4000 - Manual (Page 69)

EN
69
Master Page: Right
Video and D.S.C. Playback
7. The LCD monitor or
viewfinder indications blink.
7. • Certain Wipe/Fader effects,
certain modes of Program AE
with special effects, “DIS”
and other functions that
cannot be used together are
selected at the same time.
7. • Re-read the sections covering
Wipe/Fader effects, Program
AE with special effects and
“DIS”. (
੬ pg. 31 – 33, 35)
8. Digital Zoom does not work. 8. • 10X optical zoom is selected.
• The VIDEO/MEMORY
Switch is set to “MEMORY”.
8. • Set “ZOOM” to “40X” or
“300X”. ( ੬ pg. 34)
• Set the VIDEO/MEMORY
Switch to “VIDEO”.
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
9. Play, Rewind and Fast-Forward
functions do not work.
9. • The Power Switch is set to
“A” or “M”.
• VIDEO/MEMORY Switch is
set to “MEMORY”.
9. • Set the Power Switch to
“PLAY”. ( ੬ pg. 20)
• Set the VIDEO/MEMORY
Switch to “VIDEO”.
10. The tape is moving, but there is
no picture.
10. • Your TV has AV input
terminals, but is not set to its
VIDEO mode.
• The cassette holder cover is
open.
10. • Set the TV to the mode or
channel appropriate for
video playback. (
੬ pg. 22)
• Close the cassette holder
cover. ( ੬ pg. 15)
11. Blocks of noise appear during
playback, or there is no
playback picture and the
screen becomes blue.
11.
—
11. • Clean the video heads with
an optional cleaning
cassette.
12. A memory card cannot be
played back.
12. • The Power Switch is set to
“A” or “M”.
• The VIDEO/MEMORY
Switch is set to “VIDEO”.
12. • Set the Power Switch to
“PLAY”. ( ੬ pg. 24)
• Set the VIDEO/MEMORY
Switch to “MEMORY”.
RE
FERENCES
GR-DV4000PAL_08Trouble.fm Page 69 Monday, February 17, 2003 7:24 PM