John Lewis JLDW 1225 - Manual (Page 31)

Electrical connection
The manufacturer accepts no liability
for failure to observe the following
safety precautions.
Warning! Safety standards require
the appliance to be earthed.
Prior to using the appliance for the
first time, ensure that the rated
voltage and type of supply on the
rating plate match that of the supply
where the appliance is to be installed.
The fuse rating is also to be found on
the rating plate.
Always plug the mains plug into a
correctly installed shockproof socket.
Multi-way plugs, connectors and
extension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary, have the domestic wiring
system socket replaced. In case that
the electrical cable has to be
replaced, contact your local repair
agent.
The plug must be accessible after the
appliance has been installed.
Never unplug the appliance by pulling
on the cable. Always pull the plug.
The appliance is supplied with a 13
amp plug attached. Use a 13 amp
ASTA approved (BS 1362) fuse if it is
necessary to change the fuse in the
plug supplied.
31