John Lewis JLDW 1225 - Manual (Page 14)

4. Close the rinse aid dispenser. Press the
lid until it locks into position.
Adjusting the rinse aid
dosage
The factory set in position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector (2) to increase or
reduce the dosage.
Daily use
• Check if it's necessary to refill with
dishwasher salt or rinse aid.
• Open the door, slide out the baskets and
load cutlery and dishes.
• Fill the detergent dispenser with
detergent.
• Select a washing programme suitable for
the degree of soil and the type of load.
• Start the washing programme.
Loading cutlery and
dishes
Sponges, household cloths and any object
that can absorb water must not be washed
in the appliance.
• Remove all left over food and debris from
dishes.
• Soften remnants of burnt food in pans.
• Dishes and cutlery must not impede the
rotation of the spray arms.
• Load hollow items with the opening
downwards so that water cannot collect
in the container or a deep base.
• Dishes and items of cutlery must not lie
inside one another or cover each other.
• To avoid damage to glasses, they must
not touch.
• Lay small objects in the cutlery basket.
• Plastic items and pans with non stick
coatings have a tendency to retain water
drops. These items will not dry as well as
porcelain and steel items.
• Light items (e.g. plastic bowls) must be
loaded in the upper basket and arranged
so they do not move.
14