John Lewis JLDW 1225 - Manual (Page 23)

C
9. Put the filter (A) into position in filter
(B). Turn the filter (A) clockwise until it
locks.
Caution! Never use the appliance
without filters. Incorrect
repositioning and fitting of the filters
will produce poor washing results
and will result in damage to the
appliance.
Spray arms
Caution! Never try to remove the
upper spray arm.
If residue of soil has clogged the holes in the
spray arms, remove the debris with a sharp
pointed item (e.g. toothpick, cocktail stick).
Cleaning the appliance
External cleaning
Clean the external surfaces of the appliance
and control panel with a damp soft cloth. If
necessary use only neutral detergents.
Never use abrasive products, scouring pads
or solvents, since these can damage the
surfaces and plastic parts of the appliance.
Internal cleaning
Ensure that the seals around the door, the
detergent and rinse aid dispensers are
cleaned regularly with a damp cloth.
We recommend every 3 months you run
the washing programme for heavy soiled
dishes using detergent but without dishes.
Prolonged periods of
non-operation
If you are not using the appliance for a
prolonged period of time you are advised to:
• Unplug the appliance and then turn off the
water.
• Leave the door ajar to prevent the
formation of any unpleasant smells.
• Leave the inside of the appliance clean.
Frost precautions
Avoid placing the appliance in a location
where the temperature is below 0 °C. If this
is unavoidable, empty the appliance, close
the door, disconnect the water inlet pipe
and empty it.
Moving the appliance
If you have to move the appliance (e.g.
moving house):
1. Unplug the appliance.
2. Turn the water tap off.
3. Remove the water inlet and discharge
hoses.
4. Pull the appliance out together with the
hoses.
Avoid over tilting the appliance during
transportation.
23