John Lewis JLDW 1225 - Manual (Page 13)

Filling with salt
Caution! Only use salt specifically
designed for dishwasher use. All
other types of salt, especially table
salt, will damage the water softener.
Only fill with salt just before starting
one of the complete washing
programmes. This will prevent any
grains of salt or salty water, which
may have been spilt, to remain on the
bottom of the appliance for any
period of time and cause corrosion.
1. Open the appliance door and remove
the lower basket.
2. Unscrew the cap of the salt container by
turning it anticlockwise.
3. Pour 1 litre of water into the container
(this is necessary only before filling with
salt for the first time).
4. Using the funnel provided, pour in the
salt until the container is full.
5. Screw on the cap of the salt container by
turning it clockwise until it stops with a
click. Make sure that there is no trace of
salt on the screw thread or on the
gasket.
Do not worry if water overflows
from the unit when filling with salt,
this is quite normal.
Filling with rinse aid
20
30
MAX
1
2 3
4
+ -
Caution! Only use branded rinse aid
for dishwashers. Never fill the rinse
aid dispenser with any other
substances (e.g. dishwasher cleaning
agent, liquid detergent). This would
damage the appliance.
Rinse aid ensures thorough rinsing,
and spot and streak free drying.
Rinse aid is automatically added
during the last rinse.
1. Press the release button (4) to open the
lid (3) of the rinse aid dispenser.
2. Fill the rinse aid dispenser (1) with rinse
aid. The maximum level for filling is
indicated by 'max'.
3. Clean up any rinse aid spilt during filling
with an absorbent cloth to avoid excess
foaming during the next washing
programme.
13