Jensen MZ7TFT - Manual (Page 7)

MZ7TFT
7
channel, and each MZ7TFT must be set to transmit on the same
channel as the headphone (i.e., left seat monitor/headphones set to
channel A and right seat monitor/headphones set to channel B). This
will prevent interference of audio by the IR signal being transmitted
from two monitors on the same channel. This is inherent in Infrared
Ray communication and does not mean there is a problem with the
MZ7TFT itself.
• SCREEN ADJUST
Selecting the Input Signal
The unit is provided with a AV-IN jack on the front of the monitor, as well as
AV1 inputs for your head unit or other device with composite video and line
level audio output.
When connecting the monitor to an alternate A/V device, you can plug an A/V
cable (Figure 5) into the AV-IN input jack, and then plug the red, white and
yellow RCA connectors into your A/V device.
1. Audio Input 1
2. Audio Input 2
3. Composite Video
After connecting a device using an A/V Adapter Cable, press the POWER
button on the front of the monitor to access the MAIN MENU. Select
SOURCE and then select “AUX AV IN” for the SOURCE option.
2
1
3
Red
Yellow
White
Composite Video
Audio Return
Audio Right
Audio Left
Figure 5: A/V Cable (not included)