Jensen MZ7TFT - Manual (Page 6)

MZ7TFT
6
Operation
Power On/Off/Standby
The input allows voltage ranges from DC 10.8V to 16V, which includes the DC
12V car power supply.
After connecting the power, the monitor will be in standby mode. Press the
POWER button to turn the monitor on. Press and hold the POWER button to
return the unit to standby mode.
Controls and Indicators
1. POWER: Red illumination indicates standy mode, blue indicates working
state.
NOTE: The LCD backlight will turn off after 10 seconds without signal
input.
2. IR: Remote signal repeater allows you to control your compatible head
unit using the head unit’s remote control.
NOTE: Your head unit must be compatible with the MZ7TFT touch
screen capability for the IR remote repeater function to work.
3. AV-IN: Audio/video input connector (AUX AV IN).
4. Touch Screen
5. Infrared Transmitter Array: Do not block or cover this area, as it will
affect audio transmission to headphones.
NOTE: Your head unit must be compatible with the MZ7TFT touch
screen capability for the Touch Screen function to work.
IR Interference
When used in or near direct sunlight, you may experience loud background
noise or a low audio signal. This is inherent in Infrared Ray communication
and does not mean there is a problem with the MZ7TFT itself.
If you use the MZ7TFT by a window with bright sunlight, draw the curtains/
blinds to shut out the direct sunlight, or use the MZ7TFT away from the
sunlight.
Menu Operation
While the monitor is turned on, press the POWER button to access the “MAIN
MENU” on the MZ7TFT screen. Touch a main menu selection to see the
corrresponding sub-menu.
• EXIT: To exit the menu from any level, touch the EXIT option on screen.
• PICTURE: Adjust the Brightness, Color, Contrast or Tint from -15 to +15.
• FUNCTION
• BLUE SCREEN (ON/OFF)
• VIDEO IMAGE (NORMAL/IMAGE (MIRROR))
• DISPLAY MODE ( NORMAL/FULL)
• AUTO DIMMER (ON/OFF): Useful for Daytime/Nighttime viewing
• DIMMER SCOPE (-30 to 0), -30 being more dim
• SOURCE
• SOURCE (AV1/AUX AV IN):
• IR AUDIO (A/B/OFF): If there is more than one (1) MZ7TFT in use
simultaneously, each headphone must be set to receive on a different
2
TOUCH PANEL 7-INCH TFT LCD
POWER
AV-IN
IR
MZ7TFT
1 3 4 5 5
Figure 4: Front Panel Controls