JVC LVT2086-001B - Manual (Page 48)

48
ENGLISH
FLAT Connected Device Name
SOURCE
Bluetooth
3:45 PM
Status of the device
• Signal strength/Battery remainder (only when the
information comes from the device).
Connected device name
If the screen is turned off, it will turn on again when a call/Text message comes in.
[ ]
Displays <Dial Menu> screen.
[ 5 ∞ ] Selects the registered device. (“NEW
DEVICE” appears when a new device can
be registered.)
[SOURCE] Displays <Source Menu> screen.
[ ] • Displays <AV Menu> screen.
• Activates <Voice Dialing> function.
(Hold)
− To cancel <Voice Dialing>, hold
any button on the monitor panel
(except
and VOL +/–).
* The number indicates the list position when selecting the device on the “BT Phone” source screen.
Using the Bluetooth mobile phone
Name and phone
number (if acquired)
Receiving a call
When a call comes in...
The source is changed to “ BT Phone” automatically.
• Pressing any button on the monitor panel (except
and VOL +/–) also receives a call.
When is activated...
The unit answers the incoming call automatically.
(
52)
• You can adjust the microphone volume. ( 52)
Ending the call
• Holding any button on the monitor panel (except
and VOL +/–) also ends a call.
Stopping ringing (canceling
the outgoing call)
Bluetooth icon
•
(Blue): Bluetooth mobile phone is connected.*
• (White): Not connected.
Talking...
(Hold)
(Any button except
and VOL +/–)
(Hold)
KW-AVX730 KW-ADV793
EN_KW-AVX838[J]001B.indb 48 EN_KW-AVX838[J]001B.indb 48 10.5.6 2:21:43 PM 10.5.6 2:21:43 PM