JVC LVT2086-001B - Manual (Page 37)

37
ENGLISH
Inserting the Bluetooth
adapter
1
Open the monitor panel. ( 6)
2
3
Close the monitor panel. ( 6)
The monitor panel closes automatically if no
operation is done for about a minute.
• Keep the Bluetooth adapter inserted when using the
Bluetooth function.
Connecting a new Bluetooth
device for the first time
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate each other.
To make pairing, you may need to enter the PIN
(Personal Identification Number) code of your
Bluetooth device you want to connect.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to 5 devices can
be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
Bluetooth function of the device.
Connecting Bluetooth devices
1
2
3
Change the PIN code * .
• You can enter any number you like (1-digit to
16-digit number).
• If you skip changing PIN code, press [Enter].
[BS]: Erases the character before the cursor.
[Del]: Erases the character on the cursor.
Operate the Bluetooth device to connect while
“Open...” is displayed on the screen.
Enter the same PIN code (as entered in the above
step) on the device to be connected.
Now connection is established and you can use the
device through the unit.
• The device remains registered even after you
disconnect the device. Use <Phone Connect>/
<Audio Connect> (or activate <Auto
Connect>,
44) to connect the same device
from next time.
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
PIN Code
Back Enter Exit
PIN code (initial: 0000)
Bluetooth
Phone Connect
Audio Connect
Delete Pairing
New Pairing
Enter
Enter
Enter
Enter
Device Menu
Dial Menu
Device Menu
Settings
Enter
Enter
Enter
Bluetooth
KW-AVX830
Bluetooth adapter
(KS-UBT1)
KW-AVX838
• Insert the Bluetooth adapter firmly with the
JVC logo facing up.
• This port is designed for the use with KS-
UBT1 only. Other Bluetooth adapters or USB
devices cannot be used.
“JVC”
EN_KW-AVX838[J]001B.indb 37 EN_KW-AVX838[J]001B.indb 37 10.5.6 2:21:31 PM 10.5.6 2:21:31 PM