Random play, Repeating tracks, Child lock – JVC CA-VSDT2000 User Manual

Page 23

Using the CD Player

Press the Number button to select the
track to program.

Each time you press the Number button, the selected
track is added to the program.
• For the track number more than 10, press the +10

button then the Number button.

Repeat step 5 to select the other tracks
for the program.

You can see the total playback time of programmed
tracks on the display.

Press the

button.

The System plays the tracks in the order you have pro-
grammed them.

■ You can skip to a particular program track by pressing the

4 or ¢ button during Program Play.

■ To stop playing, press the 7 button once.
To confirm the programmed tracks while the CD
player is stopped, each time press the

4 or ¢ but-

ton; the tracks making up the program will successively be
displayed in the programmed order.

To exit the program mode once, while the CD Player
is stopped, press the PLAY MODE button to light off the
“PROGRAM” indicator.

• If the total playback time of the programmed tracks ex-

ceeds 99 minutes 59 seconds, “– – : – –” will appear on
the display.

To Modify the Program

Modify the contents of the program while the CD Player is
stopped.
Each time you press the CANCEL button, the last track in
the program is deleted. To add new tracks to the end of the
program, repeat above step 5.
• To delete the all tracks in the program, press the CANCEL

button for over 2 seconds.

Random Play

(Using the Remote Control)
The tracks will play in no special order when you use this
mode.
• To enter Random Play mode, stop playback first.

Press the PLAY MODE button on the
Remote Control until the “RANDOM”
indicator lights.

Press the

3/8 button.

The tracks are played in random order.

To skip a track during playback, press the

¢ button

to jump to the next track in the random sequence. Press the

4 button to jump back to the start of a track being played.

To exit Random Play mode, while the CD Player is
stopped, press the PLAY MODE button to light off the
“RANDOM” indicator and carry out Normal Play.

Repeating Tracks

(Using the Remote Control)
You can repeat all tracks or individual track, as many times
as you like.

Press the REPEAT button on the Remote Control.
The Repeat indicator changes with each press of the button,
as shown below.

ALL

=blank display = (back to the

beginning)

Repeats one track.

ALL:

In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks
in the program.
In Random Play mode, repeats all the tracks
in random order.

To exit Repeat mode, press the REPEAT button until the
Repeat indicator on the display goes out.

■ Repeat mode remains in effect even when you change the

play mode.

Child Lock

You can prevent the unwanted CD ejection by locking.
• Before proceeding, check the position of the

¢ button

on the Unit, then turn off the System.

To Lock the CD Ejection
Hold down the

¢ button and press the % button on the

Unit.
“LOCKED” appears on the display.

To Release the Lock
Perform the same procedure when you locked.
“UNLOCKED” appears on the display.

PROGRAM

Program order number

Total playback time of the programmed tracks

(After 2 seconds)

VS-DT2000(J)_EN.book Page 20 Wednesday, February 6, 2002 4:37 PM