JVC CA-VSDT2000 - Manual (Page 10)

7
Getting Started
Attaching the Spacers
Attach the supplied spacers to the bottom of the powered subwoofer (SP-PW2000) to protect the cabinet, prevent slipping,
and absorb the cabinet vibration. Peel off the backing from a spacer and attach it.
Connecting the Powered Subwoofer (SP-PW2000)
Connect a signal cord (supplied) between the System ’s SUBWOOFER terminal and the LEFT/MONO INPUT terminal of the
Powered Subwoofer.
Connecting External Equipment
Connect signal cords (not supplied) between the System’s MD/AUX-OUT/IN terminals and the output/input terminals of the
external MD recorder, tape deck, etc.
You can then listen to the external source through the System or record the System’s CD player or tuner to the external unit.
Spacer
(supplied)
Bottom of the powered subwoofer
SUB
WOOFER
Powered Subwoofer
Signal cord (supplied)
ANTENNA
OUT IN
AM
EXT
FM
(75 )
COAXIAL
AM
LOOP
MD/AUX
CD DIGITAL
OUT
Signal cord (not supplied)
MD recorder or tape deck
(not supplied)
Pin-plug x 2
Pin-plug x 2
Signal cord (not supplied)
Stereo mini-plug
Stereo mini-plug
VS-DT2000(J)_EN.book Page 7 Wednesday, February 6, 2002 4:37 PM