JVC LVT0870-006A - Manual (Page 55)

52
CD player
After pressing CD, you can perform the following operations on a
CD player:
3 PLAY :Start playing.
4 :Return to the beginning of the current (or previous)
track.
¢ :Skip to the beginning of the next track.
7 STOP :Stop playing.
8 PAUSE :Pause playing. To resume, press 3 PLAY.
1 – 10, +10 :Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
CD changer
After selecting “CDDSC” by pressing CONTROL repeatedly, you
can perform the following operations on a CD changer:
3 PLAY :Start playing.
4 :Return to the beginning of the current (or
previous) track.
¢ :Skip to the beginning of the next track.
7 STOP :Stop playing or recording.
8 PAUSE :Pause playing. To resume, press 3 PLAY.
1 – 6, 7/P :Select the number of a disc installed in a CD
changer.
After pressing CD, you can perform the following operations on a
CD changer:
1 – 10, +10 :Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Example:
• Selecting disc number 4, track number 12, and starting playback.
1. Press CONTROL repeatedly until “CDDSC” appears on
the display window, then press 4.
2. Press CD, then press +10, 2.
Turntable
After pressing PHONO, you can perform the following operations
on a turntable:
3 PLAY :Start playing.
7 STOP :Stop playing.
CD recorder
After pressing CDR (or selecting “CDR” by pressing CONTROL
repeatedly), you can perform the following operations on a CD
recorder:
3 PLAY :Start playing.
4 :Return to the beginning of the current (or
previous) track.
¢ :Skip to the beginning of the next track.
7 STOP :Stop playing or recording.
8 PAUSE :Pause playing. To resume, press 3 PLAY.
1 – 10, +10 :Select a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
REC PAUSE :Enter recording pause by pressing this button.
To start recording again, press this button, then
3 PLAY.
Note:
You can use either CDR or CONTROL to activate the buttons listed
above. If you press CDR, the playing source also changes. On the
other hand, if you press CONTROL repeatedly to select “CDR,” the
playing source does not change.
Cassette deck
After pressing TAPE/MD (or selecting “TAPE” by pressing
CONTROL repeatedly), you can perform the following operations
on a cassette deck:
3 PLAY :Start playing.
REW :Fast wind the tape from right to left.
FF :Fast wind the tape from left to right.
7 STOP :Stop playing or recording.
8 PAUSE :Pause playing. To resume, press 3 PLAY.
REC PAUSE :Enter recording pause by pressing this button.
To start recording again, press this button, then
3 PLAY.
Notes:
• When you use a cassette deck, change the source name
connected to TAPE/MD jacks correctly (see page 17).
• You can use either TAPE/MD or CONTROL to activate the buttons
listed above. If you press TAPE/MD, the playing source also
changes. On the other hand, if you press CONTROL repeatedly to
select “TAPE,” the playing source does not change.
MD recorder
After pressing TAPE/MD (or selecting “TAPE*” by pressing
CONTROL repeatedly), you can perform the following operations
on the MD recorder:
3 PLAY :Start playing.
4 :Return to the beginning of the current (or
previous) track.
¢ :Skip to the beginning of the next track.
7 STOP :Stop playing or recording.
8 PAUSE :Pause playing. To resume, press 3 PLAY.
REC PAUSE :Enter recording pause by pressing this button.
To start recording again, press this button then
3 PLAY.
Notes:
• When you use an MD recorder, change the source name
connected to TAPE/MD jacks correctly (see page 17).
• You can use either TAPE/MD or CONTROL to activate the buttons
listed above. If you press TAPE/MD, the playing source also
changes. On the other hand, if you press CONTROL repeatedly to
select “TAPE*,” the playing source does not change.
* Selecting “TAPE” will allow you to control the MD recorder.
EN49-60.RX-8020V[A]_f 02.5.21, 10:30 AM 52