JVC LVT0870-006A - Manual (Page 52)

49
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player)
through the receiver.
This receiver is equipped with the AV COMPU LINK-III, which adds a function to operate JVC’s video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedure on the next page.
CONNECTIONS 1: AV COMPU LINK Connection
CONNECTIONS 2: Video Cable Connection
This receiver is equipped with three types of the video terminals—S-video, composite video, and component video, and the signals coming
into this receiver through one type of video jacks can output only through the jack of the same type. So you need to connect the VCR and/or
DVD player to the TV using one of the following three ways:
• When using the AV COMPU LINK remote control system, set the component video input for the DVD player and the DBS tuner
correctly (see “7 Setting the Component Video Input” on page 25); otherwise, the correct input for this receiver will not be selected on
the TV.
Notes:
• When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use automatic
selection of TV’s input mode (see page 50).
• When connecting only the VCR 1 or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
To Video Input 1
TV RX-8022PSL
S-video cable S-video cable
Source
Equipment
To Video Input 2
(Composite)
TV RX-8022PSL Composite
video cable
Source
Equipment Composite
video cable
When connecting the source equipment to the receiver through the S-video jacks, connect this receiver
to the TV’s Video Input 1 jack using S-video cables.
When connecting the source equipment to the receiver through the composite video jacks, connect this
receiver to the TV’s Video Input 2 jack (composite video input) using composite video cables.
When connecting the source equipment to the receiver through the component video jacks, connect this
receiver to the TV’s Video Input 2 jack (component video input) using component video cables.
To Video Input 2
(Component)
TV RX-8022PSL Component
video cable
Source
Equipment Component
video cable
CASE 2
CASE 3
IMPORTANT:
The AV COMPU LINK remote control system cannot control the
DBS tuner connected to the TV SOUND/DBS and DBS component
video jacks, and video components connected to the VIDEO and
VCR 2 jacks on the receiver.
CAUTION:
You can only connect to the TV
with the AV COMPU LINK EX or
AV COMPU LINK-III jack. DO
NOT connect to the TV with AV
COMPU LINK RECEIVER/AMP
jack.
AV
COMPU LINK
VHS
AV
COMPU LINK AV
COMPU LINK EX
DVD
AV
COMPU LINK- ΙΙΙ
AV
COMPU LINK- ΙΙΙ
DVD player TV
VCR 1
(VCR connected to
VCR 1 jacks)
CASE 1
EN49-60.RX-8020V[A]_f 02.5.21, 10:30 AM 49