beautypg.com

Manual exposure, White balance, Pg. 35) – JVC GZ-MC500E/EK User Manual

Page 35: R (੬ pg. 35)

background image

RECORDING FEATURES

EN

35

AD

V

A

NCE

D

OPE

R

A

T

ION

S

MasterPage: Menu_Right

Manual Exposure

Manual exposure is recommended in the
following situations:

When shooting using reverse lighting or when
the background is too bright.

When shooting on a reflective natural
background such as at the beach or when
skiing.

When the background is overly dark or the
subject is bright.

1

Select [AE] in the MSET menu. (

pg. 34)

2

If [AUTO] is selected, move the multi-

controller to r. (video mode only)

3

To brighten the image, move the multi-

controller to e. To darken the image, move the
multi-controller to w.

● Adjustment range

For video recording: –6 to +6 or AUTO (automatic
exposure)
For still image recording: –2.0 to +2.0 (EV)

4

Press 49. The setting is completed.

5

Close the MSET menu by moving the multi-

controller to

t

(

).

To lock the exposure
After step

5, press and hold 49 for over 2

seconds. The indicator appears.

NOTES:

● You cannot use the manual exposure at the same

time when the program AE function is set to

(Snow) (

੬ pg. 31), or with backlight

compensation (

੬ pg. 31).

● If the adjustment does not cause any visible

change in brightness, set [GAIN UP] to [ON].
(

੬ pg. 50)

White Balance

The white balance is usually adjusted
automatically for correctness of the colour
reproduction under various lighting. However,
you can also select the following modes
according to the shooting situations.

1

Select [WB] in the MSET menu. (

pg. 34)

2

Select the desired mode with the multi-

controller (r/t).

MWB: For adjusting the white balance

manually depending on the light source.

“Manual White Balance Adjustment”

(

pg. 36)

FINE: When shooting outdoors on a sunny

day.

CLOUD: When shooting outdoors on a

cloudy day.

HALOGEN: When a video light or similar

type of lighting is used.

3

Press 49. The setting is completed.

4

Close the MSET menu by moving the multi-

controller to

t

(

).

To return to automatic white balance
Select [AUTO] in step

2.

CONTINUED ON NEXT PAGE

GZ-MC500PAL.book Page 35 Wednesday, April 13, 2005 7:44 PM