Jura Capresso F707 - Manual (Page 30)

30
22. Problems
Problem Cause Remedy
Very loud noise coming from the Foreign body in grinding gear Drawing off pre-ground coffee still possible
grinding gear
Have IMPRESSA checked by JURA Service
Too little foam when Professional Cappuccino Frother has Clean the Professional Cappuccino Frother
frothing the milk become dirty (Chapter 13)
Individual parts of the Professional Check correct assembly of the
Cappuccino Frother are incorrectly Professional Cappuccino Frother
assembled
Coffee only drips Grinding degree too fine Coarser grinding gear adjustment
from the coffee spout
Pre-ground coffee too fine Use a coarser pre-ground coffee
High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time.
If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.