Jura Capresso F707 - Manual (Page 12)

12
You can adjust the water quantity in steps of 5 ML using the Rotary
Switch (1).
Ⅲ READY
Ⅲ Turn the Rotary Switch (1) until the required water quantity is
displayed.
Ⅲ For example, 120 ML
8. Making 1 cup of coffee
You can choose from 3 different coffee strengths. Touch one of
the symbols
/ / to select the strength of your coffee.
MILD NORMAL STRONG.
You can set the amount of water you want with the Rotary
Switch (1) prior to drawing off coffee
Touch the (8) symbol to stop drawing off coffee pre-
maturely.
The amount of coffee water you used last is saved by the
IMPRESSA until the next time you make coffee.
Press the Rotary Switch (1) briefly to check how much coffee
water you used last.
Ⅲ READY
Ⅲ Place a cup under the height-adjustable coffee spout (17).
Ⅲ Touch the
(5).
Ⅲ COFFEE symbol
Ⅲ Select an aroma by touching one of the symbols
Ⅲ E.g. (STRONG
aroma)
Ⅲ Touch the
symbol (3).
Ⅲ HEATING UP
Ⅲ PRESS
MAINT.
Ⅲ Touch the symbol (7).
Ⅲ RINSING
Ⅲ READY
6.1 Rinsing the IMPRESSA without display request
Ⅲ Press the Rotary Switch (1) until
FILTER – / ߛ appears.
Ⅲ Turn the Rotary Switch (1) until
MAINTENANCE appears.
Ⅲ Press the Rotary Switch (1) to confirm.
Ⅲ
RINSE
Ⅲ Press the Rotary Switch (1) again to confirm.
Ⅲ
RINSING
Ⅲ READY
7. Adjusting the water quantity for coffee
The indicated value in ML is a reference value and may deviate
from the actual value
You can change/stop the water quantity during the draw-off
operation, too. Turn the Rotary Switch (1) until the required ML
value is displayed.