Jura Capresso F707 - Manual (Page 13)

13
E
Ⅲ STRONG
Ⅲ Touch the (8) symbol
Ⅲ
160 ML (water quantity last adjusted).
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until the required amount of coffee water
appears on the display (9).
Ⅲ e.g. 120 ML
Ⅲ COFFEE
Ⅲ Your coffee is being prepared.
Ⅲ
READY
9. Making 2 cups of coffee
You cannot choose the strength of the coffee when making
2 cups. The machine automatically makes 2 mild cups of coffee.
You can set the amount of water you want with the Rotary
Switch (1) prior to drawing off coffee
Touch the (8) symbol to stop drawing off coffee pre-
maturely.
The amount of coffee water you used last is saved by the
IMPRESSA until the next time you make coffee.
Press the Rotary Switch (1) briefly to check how much coffee
water you used last.
Ⅲ READY
Ⅲ Place two cups under the height-adjustable coffee spout (17).
Ⅲ Touch the coffee draw-off symbol of your choice twice
Ⅲ
2 COFFEE
Ⅲ
120 ML (water quantity last adjusted).
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until the required amount of coffee water
appears on the display (9).
Ⅲ e.g. 210 ML
Ⅲ 2 COFFEE
Ⅲ Your coffee is being prepared.
Ⅲ
READY
10. Drawing off pre-ground coffee
Never use instant coffee or quick-coffee. We recommend that
you always use powder from fresh coffee beans or, pre-ground,
vacuum-packed coffee. Never fill in more than 2 portions of
powder. The pre-ground coffee tank is no storage tank. Make
sure that the pre-ground you use is not too fine. This may
cause blocking of the system. In this case the coffee only drips
out of the coffee spout.
If you have filled in too little powder, the message NOT
ENOUGH POWDER will be displayed. The IMPRESSA stops the
operation and returns to ‘ready for draw off’ mode.
You can stop the draw-off operation at any time by pressing
any coffee draw-off key.
Ⅲ READY
Ⅲ Put 1 or 2 cups under the adjustable coffee spout (17).