Jura Capresso F707 - Manual (Page 20)

20
Ⅲ Turn the Rotary Switch (1) to select the minutes.
Ⅲ
2:05
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ
TIME
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READY
If the machine is disconnected from power supply, the time
must be programmed again.
15.7 Programming the automatic switch-on time
You must programme the time (Chapter 15.6) if you want to
use the automatic switch-on function (––:–– = inactive).
Ⅲ READY
Ⅲ Press the Rotary Switch (1) until
FILTER – / ߛ appears
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until MACHINE ON is displayed.
Ⅲ
MACHINE ON
Ⅲ Now press the Rotary Switch (1) to start programming the switch-
on time.
Ⅲ
--:--
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
Ⅲ
12:--
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to acti-
vate the minutes.
Ⅲ 12:--
Ⅲ Turn theRotary Switch (1) to select the minutes.
Ⅲ
12:05
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ
MACHINE ON
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READY
15.8 Programming the automatic switch-off time
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can pro-
gramme the switch-off time in a range between 0.5 and
9 hours, or select ––:–– (i.e. inactive).
Ⅲ
READY
Ⅲ Press the Rotary Switch (1) until
FILTER – /
ߛ appears
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until OFF AFT. HR is displayed.
Ⅲ
OFF AFT. HR
Ⅲ Now press the Rotary Switch (1) to start programming the switch-
off time. Switch-off time OFF AFT. HR
Ⅲ
5.0 HR