JVC TH-V70R - Manual (Page 76)

71
Operating other manufacturers’ VCR
By changing the remote control signals from preset ones to the other manufacturers’, you can use the remote control supplied
for this system to operate other manufacturers’ VCRs.
• You can also operate other manufacturers’ TVs using the remote control supplied with this system. (See page 20.)
• When operating other manufacturers’ VCR, aim the remote control directly at the remote control sensor on your VCR.
Refer also to the instruction manuals supplied with your VCR.
7 Setting the remote control signal for operating your
VCR.
• You can operate your VCR without setting the remote control signal if your VCR
is a JVC VCR.
1 Slide the remote control mode selector to ”DVD.”
2 Press and hold VCR
.
Keep it pressed until step 4 is finished.
3 Press VCR CONTROL.
4 Press Number buttons (1-9, 0) to enter a manufacturer’s code
(2 digit).
See the list below to find the code.
Examples: For a Philips VCR, press 0, then 5.
For a Panasonic VCR, press 2, then 1.
5 Release VCR .
6 Try to operate your VCR by pressing VCR .
When your VCR turns on or off, you have entered the correct code.
If there are more than one cord listed for your brand of VCR, try each one
until you enter the correct one.
7 To operate your VCR
You can use the following buttons for operating your VCR:
VCR : Turns on and off the VCR.
• After pressing VCR CONTROL, you can use the following buttons for operating
your VCR:
PLAY : Starts playback.
STOP : Stops operation.
PAUSE : Pauses playback.
¡: Fast forwards a video tape.
1: Rewinds a video tape.
÷
REC : Press this button together with PLAY to start recording.
Press this button together with PAUSE to pause
recording.
CHANNEL +/– : Changes the TV channels on the VCR.
RM–STHV70R
DVD CINEMA SYSTEM
CHANNEL VOLUME TV VOL
TUNING
STOP
DIMMER
PAUSE
FF/ /REW
TV/VIDEO 1 MUTING ¡
REC
PLAY
DOWN UP
MEMORY STROBE
DVD VCR 1
AUDIO
AUX
ANGLE
FM/AM
SUBTITLE DECODE
RETURN DIGEST ZOOM VFP
TOP MENU MENU ZOOM
CONTROL – SUBWOOFER + EFFECT
– CENTER +
– REAR-R +
TEST
SLEEP
TV
VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
SURROUND
MODE
FM MODE
1 2 3
4 5 6
7 8 9
10 0 +10
100+
TV AUDIO
VCR
SOUND –
+
– REAR-L +
PTY SEARCH
DVD
RDS
TA/NEWS/INFO
PTY ( PTY 9
RDS DISPLAY
VCR
button
VCR CONTROL
button
Number buttons
Remote control
mode selector
CHANNEL +/–
buttons
¡ button
1 button
PLAY button
PAUSE button
STOP button
÷
REC button
Manufacturers’ codes for VCR
Manufacturer Code
JVC 01
Aiwa 02, 20
Bell+Howell 03, 16
Blaupunkt 04
CGM 03, 05, 16
Daewoo 34
Digtal 05
Fisher 03, 16
G.E. 06
Grundig 07
Hitachi 08, 09
Loewe 05, 10, 11
Magnavox 04, 05
Mitsubishi 12 – 15
Manufacturer Code
Nokia 16
Nordmende 17 – 19, 31
Orion 20
Panasonic 21
Philips 05, 22
Phonola 05
Saba 17 – 19, 23, 31
Samsung 24, 25
Sanyo 03, 16
Sharp 26, 27
Siemens 07
Sony 28 – 30, 35
Telefunken 17 – 19, 31, 32
Toshiba 33
* Manufacturers’ codes
are subject to change
without notice. If they
are changed, this
remote control cannot
operate the
equipment.
EN71-78TH-V70R[B]1 02.3.12, 6:37 PM 71