John Deere POWERTECH 4045 - Manual (Page 49)

Instrument Panel - Elect. Cont. Earlier Engines
OURGP11,000027A –19–07AUG06–1/7
Instrument Panel
RG11169
–UN–01NOV00
Instrument Panel (Earlier Electronically Controlled Engines)
A—Engine Oil Pressure Gauge
B—Amber “WARNING” Indicator
C—Red “STOP ENGINE” Indicator
D—Diagnostic Gauge/Hour Meter
E—Touch Switch
F—Touch Switch
G—Audible Alarm (Optional)
H—Audible Alarm Override Switch (Optional)
I—Analog Throttle Control (Optional)
J—Dimmer Control (Optional)
K—Engine Preheater Indicator (Optional)
L—Key Start Switch
M—Override Shutdown Rocker Switch
N—High-Low Speed Select Rocker Switch
O—Bump Speed Enable Rocker Switch
P—Speed Select Rocker Switch
Q—Fuse Holder (5-Amp Fuse)
R—Tachometer
S—Power Meter (Percent Load) (Optional)
T—Voltmeter (Optional)
U—Engine Coolant Temperature Gauge
This instrument panel for earlier P OWER T ECH

4.5 L and
6.8 L electronically controlled engines is electronically
linked to the John Deere engine control unit (ECU). This
allows the operator to monitor engine performance as well
as to diagnose any troubles during engine operation.
All electronic engine controls are optional equipment for
John Deere
P OWER T ECH

OEM Engines. These electronic
controls may be provided by the equipment manufacturer
instead of purchased from John Deere. Refer to your
engine application manual for specific guidelines if John
Deere sourced controls and instrumentation are not used.
P OWER T ECH is a trademark of Deere & Company.
Continued on next page
16-1
080706
PN=47