John Deere POWERTECH 4045 - Manual (Page 38)

Fuels, Lubricants, and Coolant
OURGP11,0000012 –19–27JUL06–2/3
4.5 L Engine Oil and Filter Service Intervals in Hours of Operation
Oil Pan Option Codes
Power Fuel Sulfur Content a 1901, 1902 1903 1904 1923 1976
Rating
Interval Interval Interval Interval Interval
kW (hp) Std Prem Std Oil Prem Std Prem Std Oil Prem Std Oil Prem
Oil Oil Oil Oil Oil Oil Oil
36-50 Less Than 0.05% (500 ppm) 250 500 250 500 250 500 250 500 250 500
(48-67)
0.05% - 0.50% (500 - 5000 ppm) 150 400 150 400 150 400 150 400 150 400
0.50% - 1.0% (5000 - 10,000 ppm) 125 250 125 250 125 250 125 250 125 250
63-86 Less Than 0.05% (500 ppm) 250 375 250 500 250 500 250 500 250 500
(84-115)
0.05% - 0.50% (500 - 5000 ppm) 150 275 150 400 150 400 150 400 150 400
0.50% - 1.0% (5000 - 10,000 ppm) 125 175 125 250 125 250 125 250 125 250
93 (125) Less Than 0.05% (500 ppm) 250 375 250 375 250 500 250 500 250 500
0.05% - 0.50% (500 - 5000 ppm) 150 275 150 275 150 400 150 400 150 400
0.50% - 1.0% (5000 - 10,000 ppm) 125 175 125 175 125 250 125 250 125 250
99-108 Less Than 0.05% (500 ppm) 250 375 250 375 250 375 250 500 250 500
(133-145)
0.05% - 0.50% (500 - 5000 ppm) 150 275 150 275 150 275 150 400 150 400
0.50% - 1.0% (5000 - 10,000 ppm) 125 175 125 175 125 175 125 250 125 250
117-143 Less Than 0.05% (500 ppm) 250 375 250 375 250 375 250 375 250 500
(157-192)
0.05% - 0.50% (500 - 5000 ppm) 150 275 150 275 150 275 150 275 150 400
0.50% - 1.0% (5000 - 10,000 ppm) 125 175 125 175 125 175 125 175 125 250
Use of premium oil also requires use of an approved John Deere oil filter.
a If considering fuel with sulfur content over 0.50% (5000 ppm), contact your John Deere Dealer (dealer to reference DTAC solution).
Continued on next page
10-8
080706
PN=36