Connecting the camera to the, Macintosh – JVC Everio GZ-HD30 User Manual
Page 35

35
Macintosh 2
Connecting the Camera to the Macintosh
Preparation:
Close the LCD monitor to turn off the camera.
•
Never disconnect the USB cable while the access lamp on the camera lights or blinks.
•
Do not turn off the camera when the USB cable is connected, to prevent malfunctions of the
computer.
•
Connect the camera directly to the computer, not through a hub.
•
Do not use an extension USB cable.
•
When you copy files from the computer to the recording medium on the camera, do not include any
other files than those recorded on the camera.
•
Do not delete, move, or rename the files and folders in the camera from the computer.
◆
When you have finished operation
Always follow the procedures below when disconnecting the camera, or turning off the camera/
computer power.
Failing to do so may cause damage to the camera and computer.
) Drag & drop the recording medium icon on the desktop into the [Trash] icon. If the confirmation
message appears, click [OK].
) Confirm that the access lamp on the camera does not light or blink. If the access lamp lights or
blinks, wait until it is turned off before proceeding.
3) Disconnect the USB cable.
) Turn off the camera and computer.
AC Adapter
DC Connector
To AC Outlet
USB Cable
USB Connector
USB Connector